Slideshow Slideshow Slideshow Slideshow SlideshowSlideshow Slideshow Slideshow

Dust Free Abrasive Cleaning

Dust Removal and Dust Free Abrasive Cleaning

Dust Removal

Coldsweep can remove nuisance from new construction, workspaces and other structures that have dust issues.

We use large amounts of compressed air to wash the walls, ceilings, floors cabinets and fixtures in a living or work area to dislodge dust and make it airborne so that HEPA-filtered air scrubbers can remove the dust from the air.

Heavy particles fall to the ground where they are collected using HEPA-filters vacuum cleaners.  A thorough dust down will dramatically reduce the particles suspended in the air you will see theme when sunlight streams through your window.

 

Dust Free Abrasive Cleaning

Dust free abrasive cleaning create 95% less dust than traditional sandblasting, while using up to 60% less abrasive. This technology precisely meters the slurry into the blast stream.

This process of dust free abrasive cleaning is spark free and can be tailored to deliver very delicate or very aggressive blasting results by adjusting the media type, blast pressure and the amount of water added during blasting. Coldsweep uses this technology uses this technology to provide solutions if dry ice blasting. Coldsweep uses this technology to provide solutions if dry ice blasting is not the best solution to a cleaning problem.

 

Oil And Gas Dust Free Abrasive Cleaning

Because dust free abrasive cleaning is spark free, it can be used for applications that would not lend themselves to traditional sandblasting.

 

Disaster Restoration Dust Free Abrasive Cleaning

Sever smoke damage can be removed from cement, rock and masonry surfaces using dust free abrasive cleaning technology. This technology of dust free abrasive cleaning typically uses 15 to 20 gallons of water per hour when removing coatings. Media consumption for gentle cleaning is less than 100 lbs./hr.

 

Lead-Based Paint Removal Dust Free Abrasive Cleaning

Our slurry blasting method prevents the spread of airborne lead. Measured airborne lead levels are consistently below EPA and OSHA action levels. Also capable or providing white metals finish for metal surfaces. Strips lead-based paint and other coatings from most masonry surfaces.

 

Log Cabin Restoration Dust Free Abrasive Cleaning

Coatings that are discolored, but still intact are traditionally very difficult to remove. Dust free abrasive cleaning strips coatings from logs with minimal damage and no harmful chemicals or paint strippers.

Call Us Now For A FREE Consultation For All Of Your Industrial Removal Needs!

1-800-659-4480

Our Services

Contact Us

Name:

Email:

Message:

captcha